MVD-1kw microwave multi-function workstation is a new type of experimental equipment composed of a set of microwave heating units. It is composed of a microwave heating low-temperature drying device, a 252 mm diameter and 50 mm high microwave resistant glass rotary table, a set of low-temperature condensing device, and a high vacuum pump without oil and water. Its features are adjustable power at any time, fast and uniform heating, high efficiency and energy saving, advanced technology, simple operation, safe and harmless, The magnetron has a long service life.
This machine has the functions of drying, dehydration, sterilization, high-temperature sintering, expansion and other processing of the test materials by microwave heating under vacuum, which can meet various forms of test requirements.

 Microwave heating is uniform, combined with vacuum drying technology, and widely used in medicine, biological products, chemical and food industries. It is very practical for the drying technology of heat-sensitive substances.
1. Desktop design, convenient operation and small floor area.
2. Integrated model, easy to operate.
3. The cold trap has large volume and strong refrigeration capacity.

1. Input power voltage: single-phase 220 ± 10% V
2. Input apparent power: ≤ 6.5KVA
3. Microwave output frequency: 2450 ± 20MHz
4. Microwave output power: 0-1250W (linearly adjustable)
5. Cooling mode of magnetron: air cooling
6. Cooling mode of microwave power supply: air cooling
7. Operating temperature range: 25-150 ℃
8. Temperature measurement method: German Opus infrared probe 0-500 degrees
9. Water-cooled condensation temperature: - 5 ℃
10. Cold water cooling mode: air cooling
11. Water collection capacity: 0.8-1.2kg/h
12. Specification of sample tray: φ 252mm
13. Microwave leakage MW/cm2: ≤ 5 (national safety standard)
14. Rotating speed of rotary table: 0~10 rpm
15. Drive motor power: 0.18KW
16. Total power of vacuum pump: 1.5kw
17. Limit vacuum: -0.098Mpa
18. Equipment noise: ≤ 65 dB
19. Control mode: key and instrument control
20. Equipment material: 304 stainless steel
21. Equipment weight: ≥ 230kg